Uniden TRU4060-2, Owner'S Manual, Page: 18 / 52

G E T T I N G S T A R T E D [ 16 ]
Entering Your Area Code
If you enter a 3-digit area code number in the “
Area Code
” option, your local area
code does not appear in Caller ID messages. For calls received from outside your local
area code, you will see a full 10-digit number.
1) When the phone is in the standby mode, press menu/mute .
2) Press + or - to move the pointer to “
Caller ID Setup
”,
then press select/ch .
3) Press + or - to move the pointer to “
Area Code
”, then
press select/ch .
4) Use the number keypad ( 0 to 9 ) to enter a 3-digit area code.
5) Press select/ch , and a confirmation tone will sound.
• If your calling area
requires 10-digit
dialing, do not
program this option.
• When the area code
has already been
stored in memory,
the stored area code
will be displayed. To
change it, press
xfer/del and the
number keypad to
enter the new
area code.
• To complete the
setting, press
select/ch , then
return the handset
to the base.
TRU4060-2_OM 5/15/02 4:55 PM Page 16