Uniden TRAX325 Owner'S Manual Download

Page: 74 / 120

Page 74

How Do I Use It?

Icon

Description

TRAX325 has no connection to the GPS receiver: GPS

navigation is not possible.
Devices with a built-in GPS receiver are permanently

connected. On such devices, the icon does not appear in

normal circumstances.
TRAX325 is connected to the GPS receiver, but the

signal is too weak and the receiver cannot determine the

GPS position.

GPS navigation is not possible.
Only a few satellites are received. Position information is

available, but elevation (altitude) cannot be calculated.

GPS navigation is possible, but the position error may be

significant.
Altitude information is available, the position is a 3D

position. GPS navigation is possible.

The remaining part of the field shows the vehicle type used for route
calculation.

Icon

Vehicle Type

Car

Taxi

Bus

Emergency vehicles

Bicycle

Summary of Contents for TRAX325

























































































































Search results

Summary of Contents for TRAX325

Reviews:

Related manuals for TRAX325

Brands by name

Popular brands

Uniden TRAX325, Owner'S Manual

Search results

Summary of Contents for TRAX325

Reviews:

Related manuals for TRAX325

Brands by name

Popular brands