[51]
4) You may continue to listen to the voice prompts, or you may select a command from the following chart:
Command
Function
Command
Function
[#]
then
[1]
Repeat a Message
[#]
then
[6]
Answering System On
[#]
then
[2]
Play incoming Messages
[#]
then
[7]
Memo Record/Stop*
[#]
then
[3]
Skip a Message
[#]
then
[8]
Greeting Message Record/Stop*
[#]
then
[4]
Delete a Message
[#]
then
[9]
Answering System Off
[#]
then
[5]
Stop Operation
[#]
then
[0]
Voice Prompts
* For Memo Record and Greeting Message Record, the
fi
rst time you enter the corresponding command,
it starts the recording automatically. If you want to stop the recording, enter the command again.
5) After all of the voice prompts have been played, you will hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this time from the chart.
6) When you are
fi
nished, hang up to exit. The system automatically returns to standby.
Note:
• If you enter an incorrect security code three times, you will hear a beep and the system will return to
standby.
• The voice memo messages are recorded as incoming messages.
• When the answering system is full, you cannot record a voice memo message until you clear some
messages from the memory.
USING YOUR
ANSWERING
MACHINE
SSE17+1 OM.indb 51
SSE17+1 OM.indb 51
15/7/08 12:08:46 PM
15/7/08 12:08:46 PM
