[45]
3) Press
[select/
▲
]
or
[select/
▼
]
to select ON or OFF.
4) Press
[menu/set]
. You will hear a con
fi
rmation tone.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays
the outgoing message. You can set the ring time to answer after six, nine or twelve rings. If you enable the Toll
Saver, the answering machine picks up after six rings if you have new messages and after nine rings if there are
none.
1) Press
[menu/set]
on the base.
2) Press
[select/
▼
]
to move the pointer to select RING TIME, and
then press
[menu/set]
.
3) Press
[select/
▲
]
or
[select/
▼
]
to select a Ring Time (TOLL SAVER,
6 TIMES, 9 TIMES or 12 TIMES).
4) Press
[menu/set]
. You will hear a con
fi
rmation tone.
Activating the Message Alert
The Message Alert feature sounds a short alert tone every 15 seconds whenever you have a new message.
Once all new messages have been played, the alert tone automatically stops beeping until you receive another
new unplayed message.
1) Press
[menu/set]
on the base.
2) Press
[select/
▼
]
to move the pointer to select MESSAGE ALERT,
and then press
[menu/set]
.
SETTING UP
THE
ANSWERING
MACHINE
SSE17+1 OM.indb 45
SSE17+1 OM.indb 45
15/7/08 12:08:44 PM
15/7/08 12:08:44 PM
