Uniden POLARIS Owner'S Manual Download | Manualshive

Page: 5 / 76

background image

2

The Uniden

POLARIS

VHF marine radio transceiver has been designed

to give you a rugged, reliable instrument that will provide you with years
of trouble-free service.

With proper care and maintenance, your Uniden

POLARIS

could outlast

your present vessel and serve you well on-board. The full features and
flexibility designed into this quality transceiver will prevent it from
becoming obsolete regardless of changes in craft or geographic
locations.

The technical excellence of the Uniden

POLARIS

is demonstrated by

the multiplicity of uses for which it has been found acceptable by the
U.S. Federal Communications Commission. The Uniden

POLARIS

is

acceptable for compulsory use on "party boats", for use on vessels
subject to the Great Lakes Radio Agreement or bridge-to-bridge
requirements, for general pleasure and commercial vessels, and certain
land stations in marine service.

The Uniden

POLARIS

is of all solid-state design with conservatively

rated, rugged components and materials compatible with the marine
environment. The transceiver utilizes a number of gaskets, sealing
rings, waterproof membranes, and other sealants to effect a waterproof
housing for protection of the electronics. The Uniden

POLARIS

Radio

meets the most stringent JIS7 waterproof specification. The unit may be
mounted in any number of convenient locations on your vessel by
utilizing the optional universal mounting bracket (FMB321).

You are encouraged to thoroughly read the rest of this Operating Guide
to acquaint yourself with the characteristics and operation of your
transceiver so that you can contribute to the longevity of your
investment.

Keep your receipt as proof-of-purchase in case warranty service is
required.

Features, specifications, and availability of optional accessories are all
subject to change without notice.

Note:

POLARIS

meets JIS7 requirements.

The color of your

POLARIS

may vary.

Uniden POLARIS

POLARIS_UT888ZL_UT01888ZA_0 10/3/02 4:18 PM Page 2

«
...
3
4
5
6
7
...
»

Summary of Contents for POLARIS













































































Reviews:

No comments

Related manuals for POLARIS

Brand: Danelec Pages: 67

LIGHTHOUSE SPORT 3.18

Brand: Raymarine Pages: 162

Brand: Sparc Pages: 2

Brand: Tangent Danmark Pages: 95

Brand: RJE Pages: 13

Brand: X4-TECH Pages: 18

Brand: Jensen Pages: 9

Brand: GST Pages: 2

Brand: Ranger Communications Pages: 29

Brand: Matsui Pages: 7

Navtex NX-700-A

Brand: Furuno Pages: 142

Brand: Samsung Pages: 2

Smart MBS RRH-C2

Brand: Samsung Pages: 31

Brand: Samsung Pages: 60

Brand: Samsung Pages: 66

Smart MBS RRH-C2A

Brand: Samsung Pages: 80

Brand: Samsung Pages: 100

Brand: Technoline Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands