8
Vehicle Recorder
UNIDEN iGO CAM 445
Installing the Optional Hardwiring Kit
If you wish to use the parking mode on the camera, you will need to install the
hardwiring kit provided.
1. Locate the location of the fuse box in your vehicle.
2. There are 3 wires that need to be connected: connect the
Yellow
cable
that goes to a constant fuse,
RED
cable that goes to an ignition-switched
fuse and
BLACK
cable that goes to a metal ground bolt.
YELLOW
cable connect to
BATTERY (+)
RED
cable connect to car
ACC
BLACK
cable connect to car
GROUND
3. Connect the USB-C end of the hardwiring cable to the camera Type-C
USB port.
4. Start your vehicle to see if it works. Arrange and hide the cables to avoid
obstruction for the driver’s view.
It is advisable to get a car electrician to professionally install the hardwiring
kit.
NOTE
Before installing the HWK-3, please ensure there is no SD Card
installed on the camera unit. Only install the SD card once the
HWK-3 is finish installing.
Summary of Contents for iGO CAM 445
Page 2: ......
Page 23: ......
Page 24: ...2023 Uniden Australia Pty Limited Printed in China V1 0...