Uniden iGO CAM 445, Owner'S Manual

Page: 19 / 24

18
Vehicle Recorder UNIDEN iGO CAM 445
Listed below are some of the problems and the possible solutions.
General Problems Possible Solutions
The device cannot take
snapshot or record
videos
•
Ensure that the SD card is formatted
properly and inserted correctly.
•
Use the recommended type of SD card
(minimum 32GB Class U3)
The device automatically
stops when recording
Video is unclear
Ensure that there are no fingerprints or dirt on
the lens. Ensure that the lens is always kept
clean.
Cross-stripe interference
in an image
This is due to the light frequency. Change the
light frequency depending on the light source.
The device crashes/
freezes
Press the ‘Reset’ button, with a pin, to restart
the device.
SD Card Error Please format the SD card and use
recommended card only. Please make sure
the SD card is recommended dash cam use.
Display turns off after a
few minutes
Please check the LCD Auto Off setting and
select Always On.
Memory card is full Please allow loop recording to overwrite
older recording files or delete unwanted files
including emergency recordings.
Camera feels warm
during operation
It is normal for the camera to get warm during
operation. Please bear in mind that the if the
camera is exposed to high temperature for
a long period of time, it might fail to boot up.
Cool it down and try again.
If you still require assistance, visit our website or call our customer service.
Troubleshooting