i. Turn the GPS501 on by pressing and
holding
.
ii. The opening screen will display.
iii. If using batteries the battery type display will
appear. Select battery type by pressing
and then press
to confirm.
After the GPS signal is acquired the battery type will be remembered and this
screen will not display on next power on.
iv. The Trip Screen displays and the top of the
display will indicate it is searching for satellite
information.
For the initial power up it may take up
to 15 minutes to secure satellite
information. When satellite data has
been retrieved 'Searching for Satellite'
will disappear and the GPS satellite icon
will show at the top of the display.
The GPS signals can be monitored in
the GPS SIGNAL SCREEN. Press
repeatedly until GPS SIGNAL SCREEN
appears.
DC Jack with Rechargeable batteries.
The GPS501 automatically turns off if
there is no key pressed within 5
seconds after DC Jack is pulled out.
3
iv
INITIAL POWER ON