88
There are four record types: regular, motion detection (MD), Alarm, MD &
alarm.
Alarm output
: when an alarm occurs, system enables peripheral alarm
devices.
Latch
: when motion detection complete, system auto delays detecting for a
specified time. The value ranges from 1-300(Unit: second)
Show message
: System can pop up a message to alarm you in the local host
screen if you enabled this function.
Alarm upload
: System can upload the alarm signal to the network (including
alarm centre) if you enabled current function.
Send email
: System can send out email to alert you when an alarm occurs.
Record channel
: System auto activates motion detection channel(s) to record
once an alarm occurs. Please make sure you have set MD record in Schedule
interface(Main Menu->Setting->Schedule) and schedule record in manual
record interface(Main Menu->Advanced->Manual Record)
PTZ activation
: Here you can set PTZ movement when an alarm occurs.
Such as go to preset, tour &pattern when there is an alarm. Click “select”
button, you can see an interface is shown as in Figure 4-97X.
Record Delay
: System can delay the record for specified time after alarm
ended. The value ranges from 10s to 300s.
