27
Previous Screen/Next Screen
Click to go to the previous screen/next screen.
PTZ Control
This function will only works with a PTZ camera. Some functions may not work
with certain PTZ camera. Please refer to your PTZ camera owner’s manual for
compatibility.
Please note this function is only for one-channel viewing mode.
You can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan,
pattern aux function, light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The
speed 8 is faster than speed 1. You can use the remote control to click the
small keyboard to set.
You can click
and
of the zoom, focus and iris to zoom in/out, depth of
field and aperture.
The PTZ rotation supports 8 directions.
In the middle of the eight direction arrows, there is a 3D intelligent positioning
key.
Please make sure your protocol supports this function and you need to use
mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse
in the screen to adjust section size. The dragged zone supports 4X to 16X
speeds. It can realize PTZ automatically. The smaller zone you dragged, the
higher the speed.
