Uniden GNS8431 Owner'S Manual Download Page 37

Page: 37 / 76

www.uniden.com.au, www.uniden.co.nz

Navigation Software

www.uniden.co.nz

When the brief tour finishes, touch [End]. The Caution screen then displays. Please

take the time to read and understanding the caution fully, then touch [I Agree].

Note :

The [Brief Tour] is seen only when the navigation software starts initially. After that time, only the Caution screen is

displayed for future start up. The Caution must be accepted by touching [I Agree] to enter into the navigation software.

When the brief tour finishes, touch [End]. The Caution screen then displays. Please
take the time to read and understand the caution fully, then touch [I Agree].

Note :

The [Brief Tour] is seen only when the navigation software starts initially. After that time, only the Caution screen is

displayed for future start up. The Caution must be accepted by touching [I Agree] to enter into the navigation software.

GNS8431-8436 OM-COVERS.indd 8

5/11/07 3:28:26 PM

Summary of Contents for GNS8431













































































Search results

Summary of Contents for GNS8431

Reviews:

Related manuals for GNS8431

Brands by name

Popular brands

Uniden GNS8431, Owner'S Manual

Search results

Summary of Contents for GNS8431

Reviews:

Related manuals for GNS8431

Brands by name

Popular brands