Uniden GNS8431 Owner'S Manual Download Page 34

Page: 34 / 76

www.uniden.com.au, www.uniden.co.nz

Navigation Software

Warnings and Notifications

Before using the Navigation software please read carefully the owner’s manual for the correct installation of the GNS8431/
GNS8436 car navigation unit.

Do not attempt to change the Navigation settings while driving.

Park the vehicle at a safe place before making changes to the Navigation settings.

For your safety the Safe Mode setting (page 43) is default ON which prevents changes from the touchscreen

while the car is moving.

Road layouts change and the voice guidance and the route on the map may differ from the actual road layout.

Drive safely, observing actual road layout and traffic signals.

If the Navigation software guides you to a place where it is difficult to travel because of poor road conditions,

use another road to travel safely. The Navigation software will automatically recalculate the route if a different

road is followed.

The Navigation software displays the moving speed as a navigation reference only. Always refer to the car’s

speedometer for final guidance.

GNS8431-8436 OM-COVERS.indd 5

5/11/07 3:28:23 PM

Summary of Contents for GNS8431













































































Search results

Summary of Contents for GNS8431

Reviews:

Related manuals for GNS8431

Brands by name

Popular brands

Uniden GNS8431, Owner'S Manual

Search results

Summary of Contents for GNS8431

Reviews:

Related manuals for GNS8431

Brands by name

Popular brands