3
GETTING STARTED
Set Up the Base
Attach the Stand
Before you attach the stand, you have to decide if you want the phone
to rest on a desk or hang on a wall.
For desktop use
Turn the stand so the word
1.
Desk
is
right-side up (it will be on the left).
Insert the tabs into the notches
2.
marked
Desk
at the top of the base.
Slide the stand up until it snaps into place.
3.
For wall mount use
Turn the stand so the word
1.
Wall
is
right-side up (it will be on the left).
Insert the tabs into the notches
2.
marked
Wall
at the bottom of the
base.
Slide the stand down until it snaps
3.
into place.
To Remove the Stand
Pull the locking tabs up and back. Then, slide the stand straight off the
opposite direction you put it on.
Connect the Corded Handset
Use the coiled cord to connect the corded handset to the connector on
the left side of the base.
For wall mount use only
1. On the front of the base, pull the clip
(that holds the corded handset in place)
out of its slot.
Rotate the clip 180 degrees.
2.
Flip it from front to back and slide it back
3.
into the slot.
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
Elite9145om_20110115.indd 3
28/9/11 12:14:22 PM
