36
Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter and
phone cord from the wall before touching it.
If the liquid is only on the exterior housing of the base or handset, wipe
it off and use as normal. If you can hear liquid inside the housing:
Remove all compartment covers, and disconnect all cables and
1.
cords.
If liquid is leaking from any vent or hole, turn the phone so that vent
2.
faces down. If not, place the largest vent face down.
Let dry for at least 3 days. Check for liquid inside the phone before
3.
replacing compartment covers and reconnecting cords.
Resetting Stations
If you have problems with the base, unplug the base to reset it. Plug it
back in after at lease a minute. If you have problems with a cordless
handset or want to replace one, reset it:
Press and hold
1.
eND
and
#
at the same time until you see the
System
Reset
menu.
If you still have the base the handset is registered to, select
2.
Deregister
HS
, then select the handset you want to reset. If you don’t have that
base anymore, select
Base Unavailable
.
To confirm, select
3.
Yes
. The handset displays
Handset not registered
.
Registering Handsets
The base can register up to 10 handsets. If you see a “not registered”
message on a handset, you must register it to a base before using it.
On the base, open the menu and select
1.
Register Accy
.
On the handset, press and hold #; the handset displays
2.
Registering
.
Wait until the display says
3.
Registration Complete
(about 30 seconds),
then pick up the handset; press
HOMe/flasH
.
If you don’t hear a dial tone or the display says
#
Registration Failed
,
charge the battery completely, then try again.
Elite9145om_20110115.indd 36
28/9/11 12:14:50 PM
