32
To...
From the base
From a handset
hear the caller
leaving a message
Listen to the caller over the
speaker.
Press
Message/MuTe
.
answer the call
Pick up the corded handset. Press
HOMe/flasH
.
mute the call screen
without answering
Press
Play/sTOP
.
Press
eND
or return the
handset to the cradle.
If you mute the call screen, the system continues
taking the message: it just stops playing through the
speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Ans. Setup
, then
select
Security Code
. Use the number keypad to enter a two-digit
security code (
00
to
99
). Press
seleCT
when you’re finished.
Remember to make a note of your new security code!
#
Dialing In to Your System
Call your phone number and wait until the system answers.
1.
If you have the
♦
Ring Time
set to
Toll Saver
, the system answers
after 2 rings if you have new messages and 4 rings if you don’t.
You can hang up during the third ring.
If the system is turned off, it answers after 15 rings and sounds a
♦
series of beeps.)
During the greeting or beeps, press
2.
#
and
immediately
enter your
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
The system announces the time, the number of messages in
3.
memory, and a help prompt. It beeps to let you know it's waiting for a
command.
4.
When you hear beeping, enter a 2-digit command from the chart.
If you don't press
#
any keys for 15
seconds, the
system hangs
up and return to
standby.
#1 Repeat message #5 Stop playback
#2 Play message
#6 Turn the system on
#3 Skip message
#9 Turn the system off
#4 Delete message
#0 Hear help prompts
Elite9145om_20110115.indd 32
28/9/11 12:14:50 PM
