11
Place the Repeater on the Wall
You can mount the repeater directly to a wall using the horizontally
aligned mounting slots at the back of the repeater unit. Before doing this
consider the following:
Avoid electrical cables, pipes, or other items behind the mounting
♦
location that could cause a hazard when inserting screws into the wall.
Mount the repeater within distance of a working 240V AC power
♦
outlet.
The Repeater unit is NOT waterproof. If mounted onto an outside wall
place under an eave or roof overhang where it is protected from direct
weather conditions, DO NOT place in direct sunlight.
Insert two #10 screws into the wall, 57 mm apart. Leave the heads of
1.
the screws about 6 mm away from the wall. (For best results, use a
level to ensure the screws are even.)
Remember to use appropriate anchors for the wall material.
#
Keeping the AC adapter cord out of the way, place the repeater over
2.
the screw heads and slide it down into place.
To remove the unit from the wall, just slide it up and lift it off the screw
heads.
Elite9145om_20110115.indd 11
28/9/11 12:14:33 PM
