Uniden DSS7915 Series Owner'S Manual Download Page 57

Page: 57 / 64

Uniden works to reduce lead content in our PVC coated cords in our products and accessories.

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire,

electric shock and injury to persons, including the following:

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.

Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may

explode. Check with local authorities for possible battery disposal instructions.
Do not disassemble any component of this product.

SAVE THESE INSTRUCTIONS

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Do not open or mutilate the battery, and disconnect the battery before shipping this product.

3.
4.

Summary of Contents for DSS7915 Series

































































Search results

Summary of Contents for DSS7915 Series

Reviews:

Related manuals for DSS7915 Series

Brands by name

Popular brands

Uniden DSS7915 Series, Owner'S Manual

Search results

Summary of Contents for DSS7915 Series

Reviews:

Related manuals for DSS7915 Series

Brands by name

Popular brands