Uniden DSS7915 Series Owner'S Manual Download Page 54

Page: 54 / 64

Symptom

Suggestion

The Caller ID does not

display.

The call was placed through a switchboard.

Call your telephone provider to verify your Caller ID service is current.

There may be a problem with your Caller ID service.

•

You cannot register the

handset at the base.

Charge the battery pack in the handset for 5-20 hours.

Change the Digital Security Code (see page 5).

Make sure you have not stored 0 handsets already.

•

The handset doesn’t commu-

nicate with other handsets.

Change the Digital Security Code (see page 5).

Make sure that you have registered all handsets.

•

An accessory handset can’t

join the conversation.

Make sure there are not 2 handsets already using the conference feature.

Make sure that another station is not in privacy mode.

•

The Room Monitor feature

does not work.

Make sure to place the handset(s) within range of the base.

•

Summary of Contents for DSS7915 Series

































































Search results

Summary of Contents for DSS7915 Series

Reviews:

Related manuals for DSS7915 Series

Brands by name

Popular brands

Uniden DSS7915 Series, Owner'S Manual

Search results

Summary of Contents for DSS7915 Series

Reviews:

Related manuals for DSS7915 Series

Brands by name

Popular brands