Uniden DSS7915 Series Owner'S Manual Download Page 6

Page: 6 / 64

Terminology used in this Manual

Standby

The handset is not in use. If the handset is on the cradle or

[

/flash

]

[ ]

is not pressed, no line

has been activated. No dial tone is present.

CID

Caller ID is available from your Telephone provider and is offered to users on a subscription basis.

With this service and a display on your cordless phone, you will be able to see the incoming caller

information such as name and phone number.

CID/CW or

CIDCW

Caller ID with Call Waiting is available by subscription from your Telephone provider. With this ser-

vice, you will be able to view incoming caller information while on a call with another user. This will

allow you the ability to select to talk to this user and put your existing party on hold or make the

decision to ring them back.

DirectLink

If you have accessory handsets on your system, you can use two handsets as 2-way radios.

Accessory

Handsets

This phone system is expandable and will support a total of ten (0) handsets to one base. The

DSS7905 accessory handset is compatible with this model.

Global

settings

Global Settings apply to all registered handsets. If you change something under the global menu,

you change it for all handsets. Only one handset can change global settings at a time, and you

have to make sure the phone is not currently being used.

Station

Any handset or the base.

Talk

A telephone line has been activated on the handset or base, enabling a dial tone.

Summary of Contents for DSS7915 Series

































































Search results

Summary of Contents for DSS7915 Series

Reviews:

Related manuals for DSS7915 Series

Brands by name

Popular brands

Uniden DSS7915 Series, Owner'S Manual

Search results

Summary of Contents for DSS7915 Series

Reviews:

Related manuals for DSS7915 Series

Brands by name

Popular brands