[ 26 ]
USING ONE TOUCH VOICE MAIL ACCESS
If you subscribe to voice mail service, you can use your phone to access your voice
mailbox. The
voice mail
LED flashes whenever you have messages waiting in your
voice mailbox. Just program the handset with your access number and you can get
your messages at the touch of a button. (The voice mail service provider will supply
you with the access number. This number may be simply a phone number. Refer to
the provider’s literature.)
Dialing your Voice Mail Service
Once you’ve programmed your personal access number, you can dial your
mailbox with the touch of a button. When you have messages, simply pick
up the handset and press the
soft key. If you have not entered the
access number or it has been deleted, when you press the
soft key,
“
No Number Stored Press [MENU] to store number
” appears and
you will hear a beep. The phone returns to the standby mode.
Voice Mail Access
The voice mail LED on the handset is designed to work with your voice mail
service provided by your local telephone company. The LED flashes when you
have new incoming messages in the voice mail service.
You may need to occasionally reset the indicators if they remain On after
you’ve retrieved your messages. To reset the indicators, when the phone is in
the standby mode press and hold
on the base until the paging
sound stops (about 5 seconds).
• You must subscribe
to voice mail service
from your telephone
company in order to
use this feature. The
voice mail service
company will
provide you with
the access number.
• Voice Mail Access
Numbers :
Australia
Message Bank : 125101
Home Messages : 101
New Zealand
Call Minder : 083210
• To program or delete your Voice Mail Access Number
e
e
See page 15.
UP306BH (DSS2415) ENG OM 12/27/04 5:35 PM Page 26
