45
The
RESET
button is used to initialise the
base computer.
The reset button can be used if an AC power
line disturbance causes the answering system
to malfunction and become inoperative.
Pressing
RESET
does not erase any data
stored in your system memory.
You may call your answering system from any touch tone phone to monitor
sounds in the room where the base is installed.
1. Call your telephone number.
2. During the outgoing message playback, press
#
followed by your PIN code.
(See SELECTING A PIN CODE, page 41.)
3. Press
#
then
*
while the system announces the time and date.
You will hear sounds in the room where your base unit is installed.
After 15 seconds, the answering system returns to the Command Waiting mode.
4. Press
#
then
*
to monitor the room for another 15 seconds. Or, select another
remote function. Hang up to exit the system. The answering system
automatically returns to Standby.
REMOTE ROOM MONITOR
USING THE RESET BUTTON
