40
When you receive a call, the answering system automatically plays either a
preset greeting, or your own personal greeting.
▼
Preset message
The following message is prerecorded:
“Hello, no one is available to take your call.
Please leave a message after the tone.”
▼
Recording your personal Greeting
1. Press and hold
ogm
until you hear a
long tone. After the message counter LED
blinks, release
ogm
. Record your message
by speaking within 30cm of the base
microphone.
2. When you finish recording your message,
press
ogm
again. A tone sounds. Your
message plays back for your review.
▼
Announce Only feature
The Announce Only feature repeats a prerecorded greeting - “No one is available
to take your call”, or your own personal greeting. It will not allow the caller to
leave a message.
For Announce Only, move the
REC TIME
switch to the
ANN
position.
The message counter LED displays
A
when
the system is on Standby.
To choose between the pre-recorded greeting and your
personal greeting, press
ogm
during outgoing message
playback.
RECORDING YOUR OUTGOING MESSAGE
SETTING UP ANSWERING DEVICE