22
The tone feature applies only
when the base is set to pulse.
The
flash
+
2
procedure
toggles between the incoming
and original call (vice versa).
The
flash
+
1
procedure
will drop the current call and
pick up the incoming call or
call on hold.
If any key is pressed before
redial
the last number will
not redial.
If you are dialing in the pulse mode
and need to enter tone digits, press
✱
then
enter the digits. Once the call has ended, tone
mode is cancelled and pulse dialing resumes.
If you have Call Waiting service and a call
waiting tone sounds, press
flash
then
2
to accept the call. After a short pause you will
hear the new caller. To return to the
original caller, press
flash
then
1
.
The
redial
key redials the last number dialed. The redialed number can be up
to 32 digits long.
To call the last number dialed
from the handset, press
redial
.
To locate the handset when it is off
the base, press
page/int’com
on the base.
The handset beeps for 60 seconds.
The following screen appears:
Paging
PAGE
REDIAL
FLASH AND CALL WAITING
TONE