background image

0 - English

You can make an intercom call from any station, but only two stations can be in 

an intercom call at any time.
If an outside call comes in during an intercom page, the phone cancels the page 

so you can answer the incoming call.
If an outside call comes in during an intercom call, press 

HOMe/flasH

 or 

Cell

, or 

pick up the corded handset from the base, depending on which line is ringing, to 

hang up the intercom call and answer the outside call. 

To...

From the base, press...

From a cordless 

handset, press...

make an intercom page

interCOM/finD Hs.

interCOM/Clear.

Select the station you want to talk with or 

All

 to page 

all stations at the same time.

cancel a page

interCOM/finD Hs

 or hang 

up the corded handset.

enD.

answer a page

HOMe

 or pick up the 

corded handset.

interCOM/Clear

 or 

HOMe/

flasH.

end an intercom call

interCOM/finD Hs

enD.

Finding a Lost Handset

You can use the intercom to page a lost handset. When the intercom tone sounds, 

you can track the tone to the lost handset.

Chain Dialing

If you often have to enter a series of digits or a code number during a call, you can 

save that code number to a phonebook entry and use the phonebook to send the 

code number.

Enter the code number (up to 20 digits) into the phonebook just like a regular 

phonebook entry. Be sure to enter the code number into the phonebook exactly 

as you would enter it during a call. 
When you hear the prompt that tells you to enter the number, open the 

phonebook and find the entry that contains your code number.
Press 

seleCt

 twice to send the code. If you change your mind, just close the 

phonebook.

Voice Message Notification

If you subscribe to a voice mail service, your phone can notify you when you have 

a new message. This feature supports Frequency-Shift Keying (FSK) notification. 

Contact your voice mail provider for information. 
When you have new messages, the display shows a message icon. To access your 

voice mail, press 

Message/Mute

 on the handset and select 

Voice Mail

1.

2.

3.

Summary of Contents for D3288-2































Reviews: