background image

English - 

Liquid Damage

CAUTION: If the base is covered in liquid, disconnect the adapter & phone 

cord from the wall before touching it.

If the liquid is only on the exterior housing of the base or handset, wipe it off and 

use as normal. If you can hear liquid inside the housing:

Remove all compartment covers, and disconnect all cables and cords.
If liquid is leaking from any vent or hole, turn the phone so that vent faces down. 

If not, place the largest vent face down.
Let dry for at least 3 days. Check for liquid inside the phone before replacing 

compartment covers & reconnecting cords.

Resetting Stations

If you have problems with the base, unplug the base to reset it. Plug it back in after at 

lease a minute. If you have problems with a cordless handset or want to replace one, 

reset it:

Press & hold 

enD

 and 

#

 at the same time until you see the 

System Reset

 menu.

If you still have the base the handset is registered to, select 

Deregister HS

, then 

select the handset you want to reset. If you don’t have that base anymore, select 

Base Unavailable

.

To confirm, select 

Yes

. The handset displays 

Handset not registered

Registering Handsets

If you see a “not registered” message on a handset, you must register it to a base 

before using it.

On the base, open the menu and select 

Register Accy

.

On the handset, press and hold #; the handset displays 

Registering

.

Wait until the display says 

Registration Complete

 (about 30 seconds), then pick up 

the handset; press 

HOMe/flasH

.

If you don’t hear a dial tone or the display says 

Registration Failed

, charge 

the battery completely, then try again.

1.
2.

3.

1.
2.

3.

1.
2.
3.

Adapter and Battery Information

AC adapter Base

Charger

Part number

PS-0034

PS-0035

Input voltage

120V AC, 60 Hz

Output voltage 7.8V AC @ 

450mA

8V AC @ 

300mA

Use only the supplied AC adapters.

Use the proper adapter for the base & any 

chargers.

Do not place the unit in direct sunlight or subject 

it to high temperatures.


Battery pack (with normal use)

Part number

BT-1022

Capacity

300mAh, 2.4V DC

Talk time

about 7 hours

Standby time

about 7 days

Battery life

about 1 year

Replace the battery when the talk or standby time 

becomes noticeably reduced. For replacements, 

call the Parts Department (see the front cover).

Summary of Contents for D3288-2































Reviews: