background image

English - 1

You must register accessory handsets to the base before using them. (Handsets 

that came packaged with the base are already registered.)
Handsets that aren’t registered display a 

Not Registered

 message. For registration 

instructions, see p. 27, or see the accessory handset manual.
If a handset was ever registered to a base, you must reset it before it can register to 

a new base; see p. 27, or see the accessory handset manual.

Conference Calling

When an outside call comes in on the land line, the base and four handsets can 

join in a conference call with the outside caller. 
To join a call that’s already in progress, just pick up the corded handset from the 

base or press 

HOMe/flasH

 or 

sPeaker

To leave the conference call, hang up normally; other stations remain connected 

to the call. 

Call Transfer

To...

From the base...

From a cordless handset...

transfer a call

Press 

 interCOM/finD Hs

 to 

put the call on hold.

1.

Press 

interCOM/Clear

 to put 

the call on hold.

1.

Select the station you want to transfer the call to, or select 

All

 to page all the stations at the same time.

When the other station accepts the call, you’ll be 

disconnected but you can join the call again.

2.

cancel a transfer

Press 

HOMe

 to return to the 

landline call or 

Cell

 to return 

to the CellLink call.

Press 

HOMe/flasH

 to return 

to the landline call or 

Cell

 to 

return to the CellLink call.

accept a 

transferred call

To answer the page and speak to the transferring station,

1.

pick up the corded handset 

or press

 interCOM/finD Hs.

press 

interCOM/Clear

.

To accept the call, 

2.
press 

HOMe 

or

 Cell 

for the 

holding line.

press 

HOMe/flasH

 or 

Cell 

for the 

holding line.

Privacy Mode

To activate privacy mode on a land line call in progress, press 

Menu

 then 

seleCt

. As 

long as privacy mode is on, you'll see a   in the display, and no other stations can 

join your call. Privacy mode turns off automatically when you hang up; you can also 

turn it off by pressing 

Menu

 then 

seleCt

Intercom

Whenever the phone is in standby, you can make an intercom call between 

stations without using the phone line.

Summary of Contents for D3288-2































Reviews: