Uniden BCD436HP, User Manual

Page: 62 / 112

56
Channel Options
Set Audio Type
(Conventional/Motorola Only) Select All if this channel
might contain both digital and analog signals. If you are sure the channel is
analog set the channel to Analog Only . This will prevent the P25 Waiting Time
for the conventional system from losing the first part of the transmission up to the
wait time you set there.
All - The scanner determines whether the audio is analog or digital.
Digital Only - The scanner will receive the channel only if it is carrying APCO
25 digital audio.
P25 NAC Option
Search - the scanner searches and displays any NAC tone received.
Set P25 NAC - allows you to program a NAC code. See Data Naming.
Note: You can also store a (blinking) NAC code when receiving the
frequency in scan mode by pressing E/yes .
Analog Only - The scanner will only receive analog audio.
Set CTCSS/DCS
Search - The scanner searches and displays any CTCSS or DCS tone.
Note: You can also store a (blinking) CTCSS/DCS tone when receiving
a frequency in scan mode by pressing E/yes .
CTCSS - Scroll to the desired CTCSS tone. Press E/yes to save.
DCS - Scroll to the desired DCS tone. Press E/yes to save.
Set Avoid - Scroll to CTCSS or DCS and press E/yes .
Scroll to the desired tone you want avoided and press E/yes to save.
Set Number Tag
This allows you to number a Channel so you can access it
quickly from scan hold mode.
The default setting is
no number tag . See also Using Number Tags.
0-999
Set Modulation
(Conventional Only) This setting selects the modulation
used for the channel. The default setting is Auto .
Auto , AM , FM , NFM , WFM , or FMB (FM Broadcast)
See also Scan Modulation.
Set Attenuator
(Conventional Only) This setting controls whether the
scanner attenuates signals on the Channel by about 20dB.
The default setting is
Off .
On or Off
See also Scan Attenuation.