Uniden BCD436HP, User Manual, Page: 71 / 112

65
Scanning
Avoiding Channels, Departments, and Systems .
Temporary Avoid cancels when you cycle power. See also Reviewing Avoids.
Channel Avoid - Press Avoid once to Temporary Avoid .
Press quickly to toggle Permanent Avoid and Stop Avoiding when the
channel is in the display or in Channel Hold mode.
Department Avoid - Press Dept then Avoid once to Temporary Avoid .
Press Avoid quickly to toggle Permanent Avoid and Stop Avoiding .
Site Avoid
–
System Avoid - Press System then Avoid once to Temporary Avoid .
Press Avoid quickly to toggle Permanent Avoid and Stop Avoiding .
Attenuation
Channel Attenuation - Press Channel to hold on the channel and press Func
then 4(
ATT
) to toggle attenuation.
Site Attenuation -
Global Attenuation - Press Channel to hold on any channel then press and
hold Func then 4(
ATT
) to toggle global attenuation.
Modulation
Conventional Channel Modulation - Press Channel to hold on the channel.
Press Func then Channel(
MOD
) to toggle modulation.
Press Channel to release hold mode.
Site Modulation - Press Func then Dept to hold on a Site.
Press Channel to hold on any channel.
Press Func then Channel(
MOD
) to toggle modulation.
Press Channel to release hold mode.
Press Func then Dept to release Site hold mode.
Intermediate Frequency Exchange
- Press Channel to hold on the
channel. Press Func then 7(
IFX
) to toggle on or off.
Repeater Frequency Conventional Channel
- Press Channel to hold
on the channel. Press Func then press and hold 8(
REV
) .
Channel Volume Offset
- Press Channel to hold on the channel.
Press Func then press 0(
LVL
) to toggle.