75
Search/Close Call Options
Set Delay Time
Determines how long the scanner waits after a transmission
ends before resuming Quick Search and Close Call Search operations.
A negative delay will force a resume after that number of seconds.
The default setting is
2
seconds.
-10
,
-5
,
-2
,
0
,
1
,
2
,
5
,
10
,
or
30
sec.
Set Attenuator
This controls the attenuator for Quick Search, and Close Call
operations by about 20dB. The default setting is
Off
.
On
or
Off
See also Search Attenuation.
Set Audio AGC
This allows you to turn AGC (Automatic Gain Control) on or
off for Quick Search and Close Call modes. The default settings are
Off
.
Analog
-
Press
E/yes
to toggle
On
or
Off
.
Digital
- Press
E/yes
to toggle
On
or
Off
.
P25 Waiting Time
This setting gives the scanner time to determine if
frequencies have digital or analog transmissions. During this time, the scanner
will evaluate the received signal and, if it detects digital data, will open squelch
immediately. If digital is not detected before the delay expires, the scanner will
open squelch at the end of this delay. This is to prevent "false decode" problems.
The default setting is
400
ms.
0
to
1000
ms
Note:
Any analog transmissions will lose the first part of the transmission, up
to the wait time you set here.
P25 Threshold Mode
The default setting is
Auto
.
Auto
-
Manual
-
Default
-
P25 Threshold Level
The default setting is
8
.
1
to
20
Summary of Contents for BCD436HP
