Uniden Axis EP100, Operating Manual

Page: 23 / 50

Using Your Existing Internet Service Provider (ISP)
Note: For more information on how to set up specific service providers,
see the Uniden Web Page at HTTP:\\WWW.UNIDEN.COM.
This information is normally provided by your Internet Service Provider. You will
also need to know the way your ISP has you login on a text screen. The text
screen login information will be used later when you enter your Dial-up Script on
page 24. The Dial-up Script is a set of commands that will tell the modem in the
EP100 how to dial and login to your service provider. Before you start this
procedure, be sure to have the following information ready:
❏
Your E-mail user name
❏
Your E-mail password
❏
Your SMTP Host Name
❏
Your POP3 Host Name
❏
Your E-mail address
❏
Your Server Name, if applicable
❏
Your Server Password, if applicable
❏
Local Access Number
❏
PAP Server Name and Password, if applicable
❏
CHAP Server Name and Password, if applicable
❏
DNS Primary Address and Secondary Address
❏
Server Domain Name
1. Press the Function Key under
s
.
2. Press the Function Key under
I
.
3. Press the Function Key under
i
.
4. Enter your E-Mail User name. For example, jsmith.
5. Press
B
on the keyboard.
6. Enter your E-mail Password. For example, password.
7. Press
B
on the keyboard.
8. Enter the SMTP (Simple Mail Transfer Protocol) Host Name. For example,
pop.airmail.net
9. Press
B
on the keyboard.
10. Enter the POP3 (Post Office Protocol) Host Name. For example,
mail.airmail.net
11. Press
B
on the keyboard.
12. Enter your E-Mail address. For example, jsmith@airmail.net. This is used as
your return e-mail address.
13. Press
B
on the keyboard.
Setup
23