13
INSTALLING THE HANDSET BATTERY PACK
CHARGING THE BATTERY PACK
▼
Initial Battery Charging
Before plugging the phone line into your new phone for the first
time, fully charge the rechargeable battery pack for 12-15 hours
without interruption.
1) Place the handset on the base.
2) Make sure that the
charge
LED
lights. If the LED doesn’t light,
check to see that the AC adaptor
is plugged in and that the
handset makes good contact
with the base charging contacts.
1) Press in on the battery cover
release and slide the cover down
until it comes off.
2) Align the plastic connector of
the Nickel Cadium battery pack
with it’s socket and plug it in.
3) Place the battery pack inside.
Please observe how the lead is
positioned.
4) Slide the battery cover on until it
snaps into place.
CAUTION
Use only the Uniden
battery supplied with
your phone.
The black lead will be
on the right when the
plug is properly aligned.
NOTE
DG 910 operating guide 2/3/99 12:55 PM Page 13
