15
ADJUSTING THE RINGER CONTROL
ADJUSTING THE EARPIECE VOLUME
CHANGING THE HANDSET RINGER
When the phone is either charging or in standby mode, pressing
the
▼
or
▲
key on the handset selects the handset ringer volume.
There are two ringer volume settings; high and low.
When the phone is either charging or in standby mode,
1) Press
flash
button.
2) Press
1,2,3
or
4
on the keypad to select ringer tone.
The tone will automatically be programmed in.
To prevent other parties from making unauthorised calls on
your phone line, a digital code was added to the DG 910. Your
phone’s handset and base share this code, which is randomly
set each time you place the handset in the charging cradle.
To re-establish communication between the handset and the
base in the event of a power failure
1) Restore power to the base
2) Place the handset on the base. The
in use
LED blinks to
indicate that the digital security code is reset.
AUTOMATIC DIGITAL CODE SECURITY
There are four volume settings for the handset earpiece; high,
normal, medium, and low. The handset earpiece volume can
only be adjusted during a call. To lower the volume, press
▼
. To raise the volume, press
▲
.
DG 910 operating guide 2/3/99 12:55 PM Page 15
