11
1) Plug the AC adaptor cord into the 9 VDC input jack on
the back of the base.
2) Plug the AC adaptor into a standard 230/240 VAC wall
outlet.
3) Charge the battery (refer to “Charging the Battery Pack,”
page 13).
4) Plug one end of the telephone cord onto the TEL LINE
jack on the back of the base.
5) Plug the other end of the cord into your telephone jack
on the wall.
DESK/TABLETOP INSTALLATION
Before choosing a
location for your phone,
read the “Important
Safety Instructions”
on page 5.
AND
ADJUSTING
Y
OUR
PHONE
INST
ALLING
INST
ALLING AND ADJUSTING
Use only the Uniden AC adaptor supplied with this phone.
6) Set the base on a desk or tabletop
and place the handset into the base
as shown. Then, raise the antenna
to a vertical position.
TIP
DG 910 operating guide 2/3/99 12:55 PM Page 11
