19
TRAVELLING OUT-OF-RANGE
CHAIN DIALING
On certain occasions after dialing a number, you may be requested
to enter an access code, such as your account number. You can
enter this number into a memory location for later use by doing the
following.
1) Store the access code into one of the memory locations (01-20).
2) Dial the party or service main number.
3) When you need to enter the special number, press
mem
followed by the memory location (01-20)
As you begin to move too far from your base unit, you will hear a
clicking sound. As you travel further out-of-range, the voice
transmission will begin to break up. If you pass the range limits of
the base unit, your call will terminate.
NOTE
When out of range,
the
batt low/
LED
will start to flash
and the handset
beeps twice every
15 seconds.
DG 910 operating guide 2/3/99 12:56 PM Page 19
