Uniden 410, Owner'S Manual, Page: 41 / 50

41
ADDITIONAL INFORMATION
Tried to access a line when all
lines were in use.
This caller blocked their caller
ID record.
Station has joined a
conference call.
Station is transferring a call.
was pressed and there
are no records.
The displays prompts you to
press the AUTO INTERCOM
key corresponding to the
station number or enter the
station number of the unit you
want to transfer a call to or
intercom.
The incorrect data was
entered during time and date
setup.
Station has initiated an
intercom call.
Your station ID or a non-
existing station was entered.
The LOWER button on the
autodial bank has been
pressed.
Caller ID record received, but
included unrecognizable data.
DISPLAYS
DISPLAYED MESSAGE STATUS ACTION
ALL LINES IN USE
BLOCKED
CALL JOINED
CALL TRANSFER
CALLER ID NO DATA
EXT. ??
INPUT CORRECT DATA
INTERCOM CALL
INVALID ID
LOWER
MISSING DATA
Try a little later.
See “CALL WAITING CALLER
ID SERVICE OPTIONS” on
page 21.
See page 34.
See page 32.
You may not subscribe to
caller ID. See “PROGRAM-
MING CALL WAITING CALLER
ID” section on pages 21-22.
Press an AUTO INTERCOM
key or use the keypad to enter
two-digit ID of the station you
want to transfer a call to or
intercom.
Re-enter the correct time and
date. See page 12 under
“SETTING THE TIME AND
DATE.”
See pages 35-36.
Enter the correct station ID.
See “INTERCOM & PAGING
OPERATION” on page 35.
When “
LOWER
” appears on
the display press an autodial
station to access lower
autodial stations. See
“PROGRAMMING AUTODIAL”
on pages 17-19.
ADDITIONAL INFO