Uniden 410, Owner'S Manual, Page: 16 / 50

16
PROGRAMMING
While using the handset:
1.
Press to adjust the handset volume.
2.
As the volume is adjusted, 1-4 bars will appear on the LCD to visually display the handset
volume level. (1 bar representing low and 4 bars representing high volume.) The volume
setting will remain at this level until it is changed or a power failure occurs.
PROGRAMMING THE VOLUME
You can individually set the volume level for the handset/headset and speaker. When using or
switching applications, the set volume level is automatically adjusted.
HANDSET VOLUME
VOLUME
4/25 3:52
PM
15
When using the speakerphone/intercom or when the phone is in standby mode,
1.
Press to set the speakerphone volume to the desired level.
2.
As the volume is adjusted, 1-8 sets of bars will appear to visually display the volume level on
the LCD. The volume setting will remain at this level until it is changed or a power failure
occurs.
SPEAKERPHONE / INTERCOM VOLUME
HEADSET VOLUME
While using the headset:
1 .
Press to adjust the headset volume.
2 .
As the volume is adjusted, 1-4 bars on the LCD will appear to visually display the headset
volume level. (1 bar representing low and 4 bars representing high volume.) The volume
setting will remain at this level until it is changed or a power failure occurs.
The ringer volume can be set to HI, LOW or OFF. The ringer volume is factory pre-
set to HIGH. The ringer volume switch is located on the back of the unit. To adjust
the ringer volume, move the ringer volume switch to the desired position. When the
ringer volume is turned off, the unit will not ring when a call is received.
RINGER VOLUME
OFF LO HI
RING VOL.