Uniden 410, Owner'S Manual, Page: 35 / 50

35
Intercom allows you to call another station in the system without tying up an outside line. The
unit has two intercom channels, so two 2-way intercom conversations can occur at the same
time. If auto answer is turned on, and you receive an intercom call, the station will beep and the
intercom is instantly connected. If auto answer is not turned on, the station being intercommed
will begin ringing with a unique intercom ring.
NOTE:
■
To make an intercom call, stations must have a common line 1.
After the beep, begin
speaking.
MAKING AN INTERCOM CALL USING THE SPEAKERPHONE
1.
Press
INTERCOM
. The INTERCOM and SPEAKER INDICATORS will light.
2.
The LCD will display “
EXT ??
”. Enter the station number (11-22) of the station you want to
intercom.
NOTE:
■
If “
INVALID ID
” or “
UNABLE TO CALL
” appears in the display, see actions under “INTERCOM DISPLAY
MESSAGES” above.
3.
“
INTERCOM CALL
” and the extension of the station you are calling will appear in your
display, while the station you are intercomming will see your station ID.
4.
Once the caller answers, begin talking.
5.
To end the intercom conversation, press
INTERCOM
again or .
MESSAGE STATUS ACTION
INVALID ID
Either your station has been
entered or a non-existing station
number has been entered, i.e. 32.
Try intercomming this
station at another time.
INTERCOM CALL
Initiating an intercom call.
Enter a valid station
number, 11-22.
UNABLE TO CALL
Do Not Disturb (DND) is turned on
at the receiving station.
INTERCOM DISPLAY MESSAGES
INTERCOM & PAGING OPERATION
INTERCOM & P
AGING