- 12 -
OLED EXAMPLES
MEANING
Time Display
Highway
Batt
12.0
v
AM
12 : 55
Information displayed:
• Voltage
• Time and AM/PM
• Highway/City/Advanced
Quiet Ride
K
24.051
GHz
Speed
Q-Ride
20
mph
Information displayed:
• Current speed in mph/km/h
• Signal strength indicators (single indicator
shown)
• Status Area (Q-Ride displays)
Dark Mode
Set mode to Dark if the unit’s OLED is not
anticipated to change a lot to prevent image
burn-in (
Auto Dim
setting).
In Dark mode, the OLED is dark with a single
white dot in the lower corner that moves from
bottom left to center to bottom right. The
movement of the dot confirms that the unit is
still powered up.
INSTALL AND TURN ON R7
You can mount the R7 on the windshield (1- and 2-cup suction brackets included) or
on the dashboard (hook and loop tape included).
INSTALL/POWER ON
Windshield
When you mount the R7 on the windshield, mount it in the middle of the windshield
between the driver and passenger. Be sure there are no obstructions and that there
is a clear view through the windshield.
1. Attach the rubber suction cups to the bracket and push the cups firmly onto the
windshield.
2. Slide the unit onto the bracket until it clicks into place.
3. Plug the power cord RJ11 connector into the R7 and plug the cigarette lighter
adapter into the vehicle’s cigarette lighter.
4. When the vehicle turns on, the R7 automatically turns on and runs through a
self test cycle.
Release the
R7
from the bracket by pressing the Eject key on top of the detector.
