- 25 -
2. Use the
+
and
-
keys to increase
or decrease the category with the
highest allotment by 50 units.
Using the examples to the right,
you start with User Mark at the
maximum, 1750, so pressing
+
doesn’t affect the allotments.
Pressing
-
will subtract 50 from
User Mark and add 50 to Mute
Memory.
Menu
Mute mem User Mark
300 (100)
1700 (200)
250 (100)
1750 (200)
Press
-
again for the following result:
Menu
Mute mem User Mark
350 (100)
1650 (200)
250 (100)
1750 (200)
3. Press
MENU
to save that change.
Change Quota?
displays.
Change Quota?
Menu
4. Press
MENU
again to accept
changes to the Memory Quota.
A confirmation message displays
before returning to the status
screen.
Quota Completed
Menu
USER MARKS (LASER AND RADAR SITES)
With the R7, you can mark geographical points where you commonly encounter
radar transmissions, These can be school zones, red-light cameras, and places where
police frequently monitor traffic.
When you are at the location, press
MARK
. The R7 announces “User mark logged.”
Now, when you approach these points, the R7 announces “User mark ahead.”
Press and hold
MARK
at that location to delete that user mark.
The R7 registers up to 2000 user marks. It allocates 1000 marks each for User Marks
and Mute Memory locations.
RED LIGHT CAMERA POINT DELETE
When you are at a red light camera and an alert displays, you can delete that camera
point. Once deleted, the R7 will not alert at that red light camera location again.
To delete the RLC Point, press
MUTE/DIM
on the unit or
MUTE
on the power cord
while the alert displays.