background image

- 27 -

•  City: X and K band sensitivity reduced; Ka band full sensitivity.

If a band is turned off through the menus, it is off in all modes.

REAR BALANCE

This feature lets you adjust the X, K, and Ka band rear radar sensitivity from 100% to 

30% in Highway, City, and Advanced modes. If you set rear balance to 50%, the rear 

radar’s sensitivity will be half of what the front radar’s sensitivity is. If the front radar 

is set to 80%, rear radar will be 40% (half of 80%).

POP MODE

In POP mode, the R7 can detect short burst from radars that are too fast for many 

other detectors to catch. You can turn POP mode on and off in the Menu system.

ALERT DISPLAY OPTIONS

 The R7 has 2 different display options for alerts, selectable in the Menus. 

K

24.120 

GHz

Compass

NE

24.120

G

HZ

 

Speed

mph

- - -

K

Alert Display #1

Alert Display #2

MODE DISPLAY

The OLED displays the voltage on the left side of the display and the mode on the 

right side. Set the mode through the 

Display Mode

 menu.

Highway

Batt

12.0

v

SCAN DISPLAY

The OLED uses an 8 segment light to indicate scanning is in progress. The lights move  

from left to right and back again from right to left. Select SCAN display through the 

Display Mode

 menu. 

Summary of Contents for 050633600412



































Reviews: