- 22 -
HOW DO I ...?
TRY THIS...
Adjust the volume
Press
VOL +
to increase volume. The unit beeps and
displays a number increase.
Press
VOL –
to decrease volume. The unit beeps and
displays a number decrease.
Mute alarm audio during
the alert
Press
MUTE/DIM
during an audio alarm to mute it.
(This is especially useful in situations where the alert
may be prolonged, such as at red lights.) You can also
press the
MUTE
button on the power cord.
Change the screen’s
brightness
Press and hold
MUTE/DIM
. The unit displays the
current brightness level. Press
MUTE/DIM
again.
The R7 announces the brightness level (Bright, Dim,
Dimmer, Dark, or Off) as it changes to that level.
Turn bands on and off
Press
MENU
then
+
to cycle through the menu options
until the band you want to turn off displays. Press
MENU
again to change that band’s status.
Change Highway to City
or set attenuation levels
in Advanced mode and
back
Press
MENU
. The first menu selection is Highway
(default). Press
MENU
to cycle through
Highway
,
City
,
and
Advanced
. After you select
Highway
or
City
, press
and hold
MENU
to exit. If you select
Advanced
, press
+
to select either the K or Ka band to adjust. Press
MENU
to adjust sensitivity levels in 10% increments.
Press
+
again to adjust the other mode.
Set a user mark
Press
MARK
to create a user mark when you are at a
location where there is normally some type of radar.
The R7 announces “User mark logged.” The R7 will
announce when you approach user marks.
R7 stores 2000 points divided between Mute Memory
and User Mark locations.
Delete a user mark
Press
MARK
again at that location to delete the user
mark.
R7 stores 2000 points divided between Mute Memory
and User Mark locations.
Delete ALL user marks
Press and hold
MARK
to delete all user marks.
The R7 does NOT ask for confirmation before deleting
single user marks.
