12
2. Press CLEAR to remove it.
(Note: The test method is still saved in All Test List and can be reloaded as needed).
Define/Establish Test Method
Test method (curve) must be defined and established before quantitative tests can be run.
This instrument has open platform for you to establish your own test methods (curves).
Such established method will be saved as defined test in “All Test List”.
This section describes how to define/establish a test method in All Test List
1. At Quantitative menu select
All Test List.
Note
: You can’t run any test from All Test List. Only run test in
Run Test
menu.
Define/Establish Test (method)
The 200 un-defined tests are originally named “To be defined 001 to 200”. You can choose to
rename any of the un-defined locations and define your test in one of the following two ways:
Define Test by Known Factor
Define Test by know Standards
Define a test by Known Factors
If you know the Factor value you can select “
By Known Factors
” to define the test method:
1.
At Quantitative menu scroll * to the left of desired location for saving the test method.
Press
ENTER
to confirm. (In this case we choose “To be defined 02” to be defined)
2. Select “By Know Factors” by pressing ENTER button. Follow the screen step by step to
enter data.
