background image

 

2

     

CAUTION

     

 

 
 

    

Read this manual before operating PowerSpin C8624 centrifuge 

 
Introduction: 
 

UNICO

®

 has been providing quality laboratory equipment for the medical labs for 12 

years. We are constantly working to improve our products with the latest technological 
innovations.  UNICO

®

 PowerSpin

 C8624 24 place centrifuge is released to meet the 

needs and offer safety features needed in the fast growing medical and health care 
industries. 

 
Description/ Intended Use

 

The UNICO

® 

 PowerSpin

 C8624 24 place centrifuges with digital variable speed control 

and electronic timer are specially designed to run for years of demanding laboratory work 
in clinical labs, physician’s offices as well as in any chemical, industrial or biological labs 
where separation for blood or other materials is desirable. 

 

Features: 
 

 

 

Push button keypad controls. 

 

24 place angled rotor for use with standard 3 to 15 ml tubes (glass or plastic).

 

(An optional adapter is required for tubes less than 10 ml or 100mm length) 

 

 

Digital speed control with speed range from 1,000rpm to 3,400 rpm.

 

 

Automatic and speed / RCF digital display simultaneously. 

 

 

Electronic 60 minutes timer with beeping signal at end of run.

 

 

Automatic time and speed reset to the last time speed and time setting for repeated job.

 

 

Memorized time and speed settings: The centrifuge will memorize the last time and 
speed settings when the unit is turned off. It will resume the previous time and speed 
settings when the unit is turned on.

 

 

Maintenance free brushless AC motor 

 

Safety: Zero RPM lid latch protection - The centrifuge lid cannot be opened until the 
unit stops spinning

It will not run unless the lid is properly closed.

 

 

Suction cup rubber feet for stable bench top operation 

 

Power switch with indicator light tells when unit is powered on.

 

 

Power on/off switch located on back of unit.

 

 

Construction: 

 

The enclosure of the PowerSpin C8624 24 place centrifuges is made of high impact 
plastic. The internal rotor chamber is made of stainless steel. A safety device is installed to 
prevent the lid from opening while the centrifuge is running. The motor is mounted on 
rubber mounts to provide quiet running and less vibration.  The Stainless Steel rotor 
chamber can be easily cleaned and disinfected. 

 
Accessories: 

 

Each Power Spin C8624 centrifuge comes equipped with angled rotor with 24-place tube 
shields already installed. 

 

Summary of Contents for PowerSpin C8624












Reviews: