Unical MODULEX EXT 100, Installation And Servicing Instructions

Page: 15 / 56

15
Instructions for the installer
3.2 - PACKAGING
The boiler MODULEX is delivered assembled
and protected by a plastic bag inside a strong
cardboard box and fixed on pallet. This allows the
boiler to be handled also by forklift.
Remove both straps and finally the cardboard box
from above, making sure the product is intact. The
packing elements (cardboard box, straps, plastic
bags, etc…) shall not be left to children’s hand
since they may be dangerous.
Inside the packing you can find:
on the boiler front:
- the smoke chamber terminal screwed to the front longeron
of the frame
- a carton box containing:
• The sealing gasket for connection between condensate
tray and terminal
• The sealing gasket for flue socket
• 2 bends + 1 Tee piece + 1 plastic plug, Ø 40 mm for
condensate drain.
• the screws necessary for fixing the smoke chamber
terminal
-
The Outer sensor - Flow sensor and the D.H.W. storage
tank sensor
- Nipple for smokes sampling test
- Resistances kit for emergency operation
- Cable glands and for electrical supply
- a carton box containing:
4 feet of support
3 caps for any reversal collectors
3 gaskets insulation for collectors
(for installation in outside).
on the boiler right side:
- One pipe for the condensate evacuation system of 1 m
-
Left and right side basement
on the back of the boiler
- Socket front and rear
on the boiler top:
- a plastic bag containing:
• This instructions manual for the installer
• Instructions manual for the user
• Instruction manual for the use of the E8 controller
• Pins to stop the fan assembly in raised position