3
General Information
1.1 - SYMBOLS USED IN THIS GUIDE
When reading this guide particular care has to be given to the parts marked with the followings symbols:
1.2 - CORRECT USE OF THE APPLIANCE
The ALKON appliance has been designed utilizing today’s heating technology and in compliance with the
current safety regulations.However, following an improper use, dangers could arise for the safety and life
of the user or of other people, or damage could be caused to the appliance or other objects.The appliance
is designed to be used in pumped hot water central heating systems. Any other use of this appliance will be
considered improper. UNICAL declines any responsibility for any damages or injuries caused by an improper
use; in this case the risk is completely at the user’s responsibility. In order to use the appliance according
to the scopes it was designed for it is essential to carefully follow the instructions indicated in this guide.
1.3 -
INFORMATION TO BE HANDED OVER TO THE USER
1
GENERAL INFORMATION
NOTE!
Suggestions for the
user
WARNING!
Indicates a potentially dangerous
situation for the product and the en-
vironment
DANGER!
Indicates serious danger
for your personal safety
and for your life
The user has to be instructed on the use and operation of his heating system, in particular:
•
Hand over these instructions to the end user, together with any other literature regarding this appliance,
placed inside the envelope contained in the packaging.
The user has to keep these documents in a safe
place in order to always have them at hand for future reference.
•
Inform the user on the importance of air vents and of the flue outlet system, stressing the fact that is absolutely
forbidden to make any alterations to the boiler.
•
Inform the user how to check the system’s water pressure as well as informing him how to restore the correct
pressure.
•
Explain the function of time and temperature controls, thermostats, heating controls and radiators, to ensure
the greatest possible fuel economy.
•
Remind the user that it is obligatory to carry out a comprehensive service annually and a combustion analysis
every two years (in compliance with the national law).
•
If the appliance is sold or transferred to another owner or if the present user moves home and leaves the
appliance installed, ensure yourself that the manual always follows the appliance so that it can be consulted
by the new owner and/or installer.
Failure to follow the instructions indicated in this guide, which is supplied with the boiler, could cause injury
to persons, animals or damage to property. The manufacturer shall not be held liable for any such injury
and/or damage.
Summary of Contents for MODULEX EXT 100
