24
3.14 - ELECTRICAL CONNECTIONS
General warnings
The electrical system must be made and
checked by professionally qualified person
-
nel in accordance with the law, who certifies
the suitability:
- of the electrical system to the power loads
absorbed by the generator,
- of the earthing system,
- of the cables
- of an omnipolar switch installed outside
the boiler room, under current legislation.
The electrical safety of the appliance is guaran-
teed only when it has been properly connected to
an efficient earthing system carried out as intend
-
ed by safety standards in force: gas, water and
heating system pipes are absolutely unsuitable
as earthing electrodes.
ATTENTION!
THE MANUFACTURER IS NOT LIABLE FOR
DAMAGE TO PERSONS AND PROPERTY
CAUSED BY AN UNSUITABLE EARTHING
SYSTEM
Connection to electric power supply
The generators are equipped with an electrical panel completely
assembled and connected to the various accessories on the
generator itself.
To connect the control panel please refer to the
specific manual supplied with the panel itself
(BASIC, BMI or IML).
Danger!
Only a qualified technician may perform the
electrical installation.
Before performing connections or any type
of operation on electrical parts, always dis-
connect electrical power and make sure that
it cannot be reconnected accidentally.
Remember that a bipolar switch must be installed
on the boiler power line with over 3 mm between
contacts, easy to access, making maintenance
quick and safe.
