USF-1600 User Manual
- page 20 -
It is not allowed to stay on other parts of the machine than the platform. Carry out loading and unloading
operations only when the machine is at a standstill with the tractor engine switched off. It is prohibited to dig
the seeds with your hand.
After filling the box with the seeds, level the seeds with the spatula
–
only at the machine standstill.
This is
especially important when the seed level sensor is installed.
Always empty the seed box and metering unit in the following way (see Fig. 9 below):
There is a dump (3) for partial ‘pouring off’ of seeds, installed, which can be op
ened by turning the lock (2). A
portion of the seeds will remain at the bottom of the dispenser when using the dump (3).
Pour the seeds into a container or onto sheet placed under.
It is not possible to empty the seed box only through the dispenser.
CAUTION!
In the final stage of emptying the dispenser, manually remove the seeds from the grooves of the metering roller
and the lower part of the dispenser, using a suitable brush. This operation should be performed at a standstill,
with the tractor and the power supply to the controller switched off.
3
2
Fig.9
.
1- cover screw; 2-lever of partial pouring off; 3-partial dump; 4-flap;
1
4
