background image

User’s Manual                                                                                                                                                           Series DC Electronic Load 

Instruments.uni-trend.com

                                                                                                                                                                                   

2

 / 

33

 

 

Foreword 

 

Dear Users, 
 
Hello! Thank you for choosing this brand new UNI-T instrument. In order to use this instrument safely and 
correctly, please read this manual thoroughly, especially the Safety Requirements part.   
 
After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably 
close to the device, for future reference.

 

 

Warranty 

 
UNI-T warrants that the product will be free from defects for a three-year period. If the product is re-sold, 
the  warranty  period  will  be  from  the  date  of  the  original  purchase  from  an  authorized  UNI-T  distributor. 
Probes, other accessories, and fuses are not included in this warranty. 
 
If the product is proved to be defective within the warranty period, UNI-T reserves the rights to either repair 
the defective product without charging of parts and labor, or exchange the defected product to a working 
equivalent  product.  Replacement  parts  and  products  may  be  brand  new,  or  perform  at  the  same 
specifications as brand new products. All replacement parts, modules, and products become the property of 
UNI-T. 
 
The  “customer” refers  to  the individual  or  entity that  is  declared in the  guarantee. In  order  to  obtain the 
warranty service, "customer" must inform the defects within the applicable warranty period to UNI-T, and to 
perform appropriate arrangements for the warranty service. The customer shall be responsible for packing 
and shipping the defective products to the designated maintenance center of UNI-T, pay the shipping cost, 
and provide a copy of the purchase receipt of the original purchaser. If the product is shipped domestically 
to the location of the UNI-T service center, UNI-T shall pay the return shipping fee. If the product is sent to 
any other location, the customer shall be responsible for all shipping, duties, taxes, and any other expenses. 
 
This warranty shall not apply to any defects or damages caused by accidental, machine parts’ wear and tear, 
improper  use,  and  improper  or  lack  of  maintenance.  UNI-T  under  the  provisions  of  this  warranty  has  no 
obligation to provide the following services: 
a) Any repair damage caused by the installation, repair, or maintenance of the product by non UNI-T service 
representatives. 
b) Any repair damage caused by improper use or connection to an incompatible device. 
c)  Any  damage  or  malfunction  caused  by  the  use  of  a  power  source  which  does  not  conform  to  the 

requirements of this manual. 

d) Any maintenance on altered or integrated products (if such alteration or integration leads to an increase 

in time or difficulty of product maintenance). 

 
This warranty is written by UNI-T for this product, and it is used to substitute any other express or implied 

Summary of Contents for UTL8200+ Series


































Reviews: