70 UTG2000B Series
(2) Set carrier signal parameters
Press Carrier
→
Type
→
Sine to select carrier signal as sine wave. The default carrier signal is sine
wave, so it is unnecessary to change in this example. You can set with multi-functional knob and direction
key. You can also press corresponding soft keys of function again, when the interface below will pop up. To
set some parameter, press corresponding soft key, input the required value and select the unit.
(3) Set OSK rate, modulation phase and PN code
Press Return to return to the interface below after setting carrier parameters:
Summary of Contents for UTG2122B
Page 2: ......
Page 129: ...UTG2000B Series 127 This user manual may be revised without prior notice...
Page 130: ...128 UTG2000B Series...