UTG2000B Series 17
Press Menu
→
Wave
→
Type
→
Harmonic
→
Param in turn to enter parameter editing
mode. After setting, enter number and unit.
2.4.10 Set expression
Expression consists of number, operational character, class symbol (bracket), and free variables for the
calculation of value, the permutation of which can represent the output waveform.
Basic expression: Vout =f(x), for example: f(x)=(x-1)*x*(x+1), the interface is as below:
The output from the signal source is duplicate signal within limited period, therefore, it is necessary to
define the range of the variable in the expression f(x). The range of x is determined by Initial value and
End value. Press Initial value to activate this parameter. Use the keypad to input 1.4rad, the unit can be °
or rad, the interface is as below:
Summary of Contents for UTG2122B
Page 2: ......
Page 129: ...UTG2000B Series 127 This user manual may be revised without prior notice...
Page 130: ...128 UTG2000B Series...
